viewbarcode.com

Download at Boykma.Com in Software Include barcode 3 of 9 in Software Download at Boykma.Com




How to generate, print barcode using .NET, Java sdk library control with example project source code free download:
Download at Boykma.Com using software toget bar code 39 for asp.net web,windows application ASP.NET Web Application 3 . On the following scree n, use the Tab key to select YES if you will use your own DNS server, or NO to have sipXecs as your DNS server (recommended). Use the Spacebar or Enter to make the selection..

The next screen (shown Code 39 for None below) asks for DNS servers for forward lookup. OpenDNS. com"s DNS servers were entered as an example.

. [ 71 ]. Download at Boykma.Com Installing sipXecs Press the Tab key to s 3 of 9 barcode for None elect the OK button and press the Spacebar or Enter. To get correct time, proper time zone settings are important for the PBX. Scheduled call forwarding, time stamps on messages, and other system services depend on accurate time.

. For time purposes, select the continent on which the iPBX will be used. [ 72 ]. Download at Boykma.Com 3 . Next, select a city in the same time zone as the sipXecs server and press Enter. The screenshot shown below will allow you to utilize your own DHCP server or have sipXecs as the DHCP server for the network. Again, as with the DNS services, if your system is on its own VLAN or operates isolated from an existing data network, it is suggested that you allow sipXecs to provide both DNS and DHCP services for the communications system network.

. Use the Tab key to select Yes or No, and to continue. [ 73 ]. Download at Boykma.Com Installing sipXecs The next screen confir barcode code39 for None ms that system-level settings are configured and we will now begin configuring service bootstrap parameters. Service bootstrap parameters are base settings for the sipXecs system..

Press the Enter key to continue. The first configuration item identifies if it is the first sipXecs server or if we are adding another clustered system. Clustering allows many sipXecs servers to act as a single system for high availability and load balancing.

See High availability installation later in this chapter.. [ 74 ]. Download at Boykma.Com 3 . Press the Enter key to select the First Server option. Next, enter the SIP Domain Name. The setup wizard will attempt to interpret this from the FQDN that was entered earlier.

. Tab to the OK button a Software Code 39 Extended nd press Enter. All services have now been configured. The services can be started or the system rebooted.

A reboot is recommended.. [ 75 ]. Download at Boykma.Com Installing sipXecs Press the Tab to the R ANSI/AIM Code 39 for None eboot button and press Enter. Remove the installation CD and wait for the system to reboot to the login screen..

sipXecs is now install ed and ready for configuration. To make sure that the sipXecs host system operates as efficiently as possible, a Linux GUI is not installed on the server. All of the administration for sipXecs is handled with a web GUI frontend called sipXconfig.

Since there is no GUI on the server, (from another computer on the network) start a web browser and in the address bar enter the IP address or hostname of the sipXecs iPBX. The administrator will be prompted to enter a new PIN (password) for the "superadmin" user when the sipXconfig is accessed for the first time..

[ 76 ]. Download at Boykma.Com 3 . Enter a secure alphanu meric PIN (twice) that cannot be easily guessed and click on the Apply button. . At this point, sipXconfig is ready for the administrator to begin configuring the system. High availability installation The installation wizar Software Code 39 Full ASCII d is able to install and configure a highly available system that consists of two physically separate servers. A High Availability (HA) system consists of a master server and a distributed server. Failover is taken care of by utilizing DNS SRV records that include information about master and distributed servers.

The HA system allows redundancy of the call control system and load balancing of traffic. Media services such as voicemail, auto attendant, and other services such as ACD and sipXconfig are not redundant and will only run on one of the master server. For a high availability installation, the master server must be installed and configured first.

The installation procedure is similar to the steps taken in the previous section to install and configure a non-redundant system. Configuring the distributed servers of the cluster begins at the bootstrap portion of the setup. It is required that you run DNS and NTP services both on the master and distributed system unless you have a different setup that provides these services in a reliable way to both systems.

. [ 77 ].
Copyright © viewbarcode.com . All rights reserved.